For commercial & industrial facilities
Water Bill Reduction That Starts Next Billing Cycle
Your meter can over-read when air and turbulence hit the flow. The FCD fixes that after your meter, so you stop paying for water you never received.
- 5-30% lower water and sewer bills (46% highest documented)
- Savings show up on your very next billing cycle
- 90% of customers reach ROI in under 12 months
IAPMO, NSF, ANSI/CAN 61, KIWA, GMP and SQF certified. Made in USA.
Prefer to talk? Call 1-(844)-934-8258
Free water & sewer bill review
Send your details and we will review your bills, size the FCD for your pipe, and project your savings. No commitment.
Why facilities choose the FCD to cut water costs
Lower water and sewer charges at once
Sewer fees are often billed off your water meter reading. Correct the reading and both lines on the bill drop.
No change to how you use water
You keep running the same operations. The FCD conditions the flow so the meter registers what you actually use.
No operational disruption
Pressure loss is negligible by design, so downstream equipment and production are not affected.
Installed in about an hour
Turn-key installation goes in right after your meter, on the consumer side, for most straightforward setups.
Buy or lease
Purchase or lease the FCD, with flexible financing and volume options for multi-site operators.
Backed in writing
6-month money-back guarantee, no questions asked, plus a lifetime transferable warranty.
How the Flow Conditioning Device lowers your bill
Air, bubbles and turbulent flow make a water meter spin faster than the real volume passing through it. That over-registration shows up as a higher water bill, and because sewer fees usually follow the meter reading, a higher sewer bill too.
The FCD is a patent-pending, in-line device installed immediately after your meter. Its four-part design separates air and gas, regulates pressure, adds a check valve on select models and removes turbulence, creating laminar flow so the meter reads accurately.
- Fits any pipe size from NPS 1/2" to 12" (DN20-DN500) and any meter type
- 316L stainless steel; titanium and specialty alloys on special order
- Custom-made to your pipe size, water pressure, install location and use profile
- Corrects over-reading from cooling tower makeup, CIP cycles, irrigation zones and pressure cycling
- Negligible pressure loss - no impact on downstream operations
- Price range $799 to $44,999 depending on pipe size
- Documented savings you can use for ESG, LEED and sustainability reporting
- Steam system assessment and trap repair also available to cut water, sewer and fuel costs
What happens after you send the form
Send your bills
Upload or email a recent water and sewer bill. The review is remote and free, with no commitment.
Get your savings projection
We check your meter setup and water-use profile, then give you a savings range, FCD sizing and an ROI estimate.
Choose buy or lease and install
If the numbers work, we schedule turn-key installation right after your meter and you watch the next bill.
Frequently asked questions
How much does the FCD cost?
Prices range from $799 to $44,999 depending on pipe size, since each FCD is custom-made for your pipe, pressure and install location. Your free bill review includes sizing and an ROI estimate.
How fast will I see a lower bill?
Savings appear on the very next water and sewer billing cycle after installation. There is no waiting period or ramp-up. 90% of customers reach full ROI in under 12 months.
Will it slow my water pressure or affect production?
No. Negligible pressure loss is a fundamental part of the design. In rare cases a few psi drop at the meter has been recorded, with no impact on downstream operations.
What if it does not work at my facility?
The FCD comes with a 6-month money-back guarantee, no questions asked. The installation cost is non-refundable. A lifetime transferable warranty is also included.
Does this work with my meter and pipe size?
Yes. The FCD works with any meter type and any pipe size from NPS 1/2" to 12" (DN20-DN500), with custom sizes available.
Do you serve homeowners?
No. Sales are strictly commercial and industrial. We serve facilities of all types across the United States, from our headquarters in Coopersburg, Pennsylvania.
See what your facility could stop paying
Send us a recent water and sewer bill. You get a free, no-commitment savings projection, FCD sizing and an ROI estimate for your facility.
- 5-30% lower water and sewer bills (46% highest documented)
- Savings show up on your very next billing cycle
- 90% of customers reach ROI in under 12 months
Prefer to talk? Call 1-(844)-934-8258