DNC software for CNC machine shops
DNC Machine Program Loading, Automated at Every Control
Harmoni sends the correct CNC program, offsets and tool data to the machine based on the job that is there. No file hunting. No wrong-revision scrap.
- Right program, right revision, loaded automatically
- Works with Mazak, Haas, Fanuc, Siemens, Heidenhain and more
- No new machines needed. Harmoni connects to the controls you own
Patent-pending factory orchestration platform. Featured in Modern Machine Shop.
Prefer to talk? Call (888) 341-4097
Get pricing and a free demo
Tell us about your machines and controls. We will show you how automated program loading works on your floor.
Why shops replace manual DNC with Harmoni
No more wrong-program scrap
RFID identifies the job at the machine, then the correct program and part revision load. Operators stop guessing which file to run.
Shorter setups
Programs, offsets and tool data arrive with the job, so operators spend less time searching for files and more time cutting.
Revision control that holds
Program distribution follows engineering revision control, so an old file does not make it to the spindle.
Instructions at the machine
The matching setup sheets, drawings, SOPs and digital checksheets show up at the work center for the same job.
Locked-down access
Machine-level multi-factor authentication can be required before sensitive or restricted programs run, with audit logs of who ran what and when.
Data flows back to ERP
Labor, machine production time, scrap and quality data push into Epicor, Infor, Infor Visual, JobBoss, JobBoss2, ABAS or Odoo for real job costing.
How Harmoni handles DNC program distribution
Traditional DNC means a shared folder, a USB stick, or an operator typing in a file name. Harmoni removes that step. Long-range RFID detects the operator and the job at the work center, then the platform loads the correct CNC program, settings, offsets and tool data for that part revision.
Harmoni is a factory orchestration layer that sits between your ERP, your machines and your people. It connects to the controls you already own, so there is no machine replacement and no rip-and-replace of your ERP.
- Supports Mazak (Mazatrol), Haas (NGC and legacy), Fanuc (0i, 30i, 31i, 32i), Heidenhain, Siemens Sinumerik, DMG MORI, Makino and Fadal
- MTConnect-native where supported, with adapter layers for older controls
- Automated program loading tied to the RFID-detected job and part revision
- Paperless program distribution that works with engineering revision control
- Digital work instructions, setup sheets and drawings delivered at the machine
- Digital quality checksheets with SPC-style trend charts for in-process inspection
- Machine-level multi-factor authentication with audit logs for restricted jobs
- Government Cloud deployment option for defense contractors handling CUI
- Native ERP integrations: Epicor, Infor, Infor Visual, ECI JobBoss and JobBoss2, ABAS and Odoo
Built for real shop floors
“I was impressed by how easy the Harmoni system was to install. They had no issues communicating with machines, new and old and it was seamlessly working with EPICOR out of the box. The technology is amazing!”
“We conducted time studies, and on average it was taking operators 11 minutes to complete every ERP transaction. With each operator doing this many times throughout the day, the potential to turn this wasted time into productive time was enormous.”
What happens after you request a quote
We learn your setup
Tell us your machine list, control brands and ERP. We confirm what Harmoni can connect to today.
You see a live demo
A free demo walks through automated program loading, work instructions and the dashboards behind them.
You get pricing and a plan
We send pricing for your machine count and outline the integration and on-site startup support involved.
Frequently asked questions
What does DNC program loading cost?
Pricing is available on request. It depends on your machines and the parts of the platform you want, so we quote after a short call. Demos are free.
Do I have to buy new machines or controls?
No. Harmoni connects to your existing equipment regardless of age or manufacturer. It supports Mazak, Haas, Fanuc, Heidenhain, Siemens, DMG MORI, Makino and Fadal, with adapter layers for older controls.
Will it work with my old machines?
Often yes. Harmoni is MTConnect-native where supported and uses adapter layers for legacy controls. Send us your machine list and we will review compatibility before you buy.
Does it replace my ERP or MES?
No. Harmoni is an orchestration layer that sits between ERP, MES, machines and operators. It integrates with Epicor, Infor, Infor Visual, ECI JobBoss and JobBoss2, ABAS and Odoo rather than replacing them.
How long does it take to get running?
Harmoni deploys in weeks, with integration support and on-site startup assistance available. Your exact timeline is confirmed during the quote.
Can it meet defense program requirements?
Harmoni supports machine-level multi-factor authentication with audit logs and DFARS-aligned practices for CMMC access management, plus a Government Cloud option for contractors handling CUI.
Do you sell outside the United States?
Harmoni serves manufacturers across the United States and is headquartered in Akron, Ohio.
See automated program loading on your machines
Send us your machine list and ERP. We will show you how Harmoni loads the right program for the right job, then send pricing.
- Right program, right revision, loaded automatically
- Works with Mazak, Haas, Fanuc, Siemens, Heidenhain and more
- No new machines needed. Harmoni connects to the controls you own
Prefer to talk? Call (888) 341-4097