Industrial Filtration Supplier
10 Inch Cartridge Water Filter, Sized for Your System
Pick the right media and micron rating for your water or process fluid. We stock 10" cartridges plus the housings that fit them.
- Pleated, depth, melt blown, wound, carbon and membrane media
- 0.03 to 840 micron options across the cartridge lines
- Matching single and multi-cartridge housings for 10" lengths
Complete filtration from HVAC air filters to final membrane processing.
Prefer to talk? Call 732.329.2500
Request Cartridge Pricing
Tell us your flow, fluid and micron rating. We will match the right 10 inch cartridge.
Why Buyers Source 10" Cartridges From Us
One source for cartridge and housing
We supply 10" cartridges and the single or multi-cartridge housings built to hold them.
Media for your fluid
Polypropylene, glass fiber, wound, melt blown, carbon block, stainless steel and membrane.
Made for critical work
Membrane cartridges are built in Class 10,000 clean rooms and integrity tested before shipment.
FDA and USP compliant options
Most series meet FDA CFR criteria for food and beverage contact and USP Class VI testing.
Fewer part numbers to manage
Filter consolidation and process analysis help cut the number of filters you buy and stock.
Stock when you need it
Stocking arrangements support just-in-time delivery on the cartridges you use most.
10 Inch Cartridge Options and Specs
A 10 inch cartridge is the most common size in single housings and the base length for 20", 30" and 40" builds. Choose the media by fluid, micron rating and temperature, then match the end cap style to your housing seat.
Our cartridge lines cover nominal industrial duty through absolute rated and sterile membrane filtration. If you are not sure which grade fits, send your fluid and flow rate and we will help you narrow it down.
- Nominal lengths from 4-3/4" to 40", with 10" as the standard building block
- Micron ratings from 0.03 to 840, depending on series
- Absolute rated series at Beta 5000 (99.98%) retention: MPX, MPA, MDP
- Membrane materials: PES, polysulfone, nylon 6,6 and PTFE for sterile work
- Stainless steel reusable cartridges rated to 500°F and 60 PSID, 2 to 840 micron
- Carbon block (SCB) cartridges at 5 micron
- End caps: DOE, 222/flat, 226/flat, 1" MNPT and 1" FNPT
- Diameters include 2.5", 2.625", 2.75", 4.25" and 4.5" Big Blue style
- Pre-flushed cartridges available for electronic and pharmaceutical use
- Electronic grade (MAS-E) flushed to under 5 ppb TOC
Trusted for Critical Filtration
“The staff and owner of fps were easy to work with and very knowledgeable. I highly recommend this company.”
What Happens Next
Send your details
Share your fluid, flow rate, micron target and housing type in the form.
We match the cartridge
A filtration specialist confirms media, micron rating and end cap style for your system.
You get a written quote
We send pricing and spec sheets so you can compare before you order.
Frequently asked questions
How much does a 10 inch cartridge water filter cost?
Pricing is quote-based. Cost depends on media type, micron rating, end cap style and quantity. Send your specs and we will price it.
Which 10 inch cartridge do I need?
It depends on your fluid, micron target and temperature. Options range from melt blown and wound depth filters to absolute rated pleated and sterile membrane cartridges.
Do you sell the housings too?
Yes. We offer single cartridge housings in 316L stainless, brass and cast iron, plus multi-cartridge housings holding 4 to 52 cartridges in 10", 20", 30" and 40" lengths.
Are the cartridges safe for food and beverage?
Most series are 100% polypropylene and comply with FDA CFR criteria for food and beverage contact, and meet USP Class VI biological test requirements.
Can I get cartridges for ultrapure or pharmaceutical water?
Yes. Membrane cartridges are made in Class 10,000 clean rooms and integrity tested. Electronic grade MAS-E is flushed to less than 5 ppb TOC.
Do you ship across the US?
Yes. We serve the United States nationwide, and some products are available internationally. Stocking programs support just-in-time delivery.
Get Pricing on Your 10 Inch Cartridges
Tell us the fluid, flow rate and micron rating. We will match the right cartridge and send a quote.
- Pleated, depth, melt blown, wound, carbon and membrane media
- 0.03 to 840 micron options across the cartridge lines
- Matching single and multi-cartridge housings for 10" lengths
Prefer to talk? Call 732.329.2500