Custom Plastic Injection Molding
Injection Molding Near Me: One US Partner, Start to Finish
EVOK works with OEMs and product brands across the United States. We handle part design, tooling and high-volume production from our Minnesota engineering team.
- Design, mold build and production parts under one roof
- 25 years solving injection molding problems
- Clear per-part cost breakdowns before you commit
Trusted by Polaris, Boston Scientific, General Mills, Rollerblade and Nautique.
Prefer to talk? Call 612-991-2001
Tell Us About Your Part
Send your part details and our engineers will review them and reply with next steps.
Why OEMs Choose EVOK
Nationwide, not just local
We serve companies across the United States. Our engineering team is based in the Twin Cities, Minnesota area and works with you wherever you are.
One partner for the whole part
Part design, mold flow, tooling, trials, first article and production. You stop juggling separate vendors.
Costs you can see
We are upfront with costs and itemize the price structure of your part, so you can help drive the design toward a lower price.
Engineering depth
Founder Paul Dathe has 25+ years in injection molding, four U.S. utility patents and a Six Sigma black belt.
Built for high volume
We aim for a low-cost production tool with minimized cycle time, while protecting performance and cosmetics.
Proven with demanding industries
Powersports, medical device, semiconductor, flat panel, consumer products and packaging.
What You Get From EVOK
Searching for injection molding near you usually means you want a molder who answers the phone, understands your part and gets it right. EVOK is a US custom injection molding partner. We review your 3D file, fix what will not mold well, design and build the tool, run trials and then supply production parts.
Every project moves through our New Part Development pipeline, so you always know the stage you are in and what happens next.
- Engineering and part design in SOLIDWORKS at $110 per hour
- Rapid prototypes from $100 to $500 per prototype, cosmetic or functional
- Design for manufacturability review of your existing 3D files
- Mold flow analysis and tolerance stack analysis
- Mold design including gate sizing, venting, and sink and flash control
- Single cavity prototype tooling before production tooling
- Molding trial reports with T1 sample evaluation
- First article inspection: 30 points per cavity on critical dimensions, 5 on non-critical
- Material and texture selection guidance
- High volume production and stock level builds
Experience Behind Your Parts
“Evok provided exceptional service! Paul and the studio team demonstrated amazing expertise and professionalism throughout the process. They exceeded expectations with precision and timely execution. Highly recommend for any project requiring top-notch design solutions.”
“An encyclopedia of knowledge in all plastic part industries. Paul’s customer service and quality control is second to none. The customer is always first!”
“Paul is very knowledgeable and passionate regarding all facets of plastics manufacturing.”
What Happens After You Submit
We review your part
Send your 3D file, print or a description. Our engineers look at moldability, material and volume.
We talk through options
You get a clear path: design work, prototype, tooling or straight to production, plus what drives your cost.
You get a quote
We itemize tooling and per-part pricing so you can see where the money goes and where it can come out.
Frequently asked questions
Do you work with companies outside Minnesota?
Yes. EVOK sells across the United States. Our engineering team is based in the Twin Cities, Minnesota area and supports customers nationwide, including Texas.
How is pricing set?
Engineering and part design is $110 per hour. Prototypes run $100 to $500 each depending on size and process. Tooling and per-part price depend on your part, material and volume, so we quote after we see your file.
I only have a sketch. Can you still help?
Yes. We can model from scratch or start with your own 3D file, then redline the changes that improve moldability and explain why each one helps.
Can I see the part before I pay for a production tool?
Yes. We offer rapid prototypes for structural and cosmetic checks, plus single cavity prototype tooling to produce test parts before production tooling.
How do you confirm parts meet spec?
Through molding trial reports on T1 samples and first article inspection. Critical dimensions carry 30 inspection points per cavity and non-critical dimensions carry 5 per cavity, with Cp and Cpk data to show process variation.
What industries do you serve?
Powersports, medical device, semiconductor and flat panel, consumer products, packaging, marine, and OEMs of many kinds.
Get Your Injection Molding Quote
Send your part file or a short description. Our engineers will review it and come back with a clear plan and pricing.
- Design, mold build and production parts under one roof
- 25 years solving injection molding problems
- Clear per-part cost breakdowns before you commit
Prefer to talk? Call 612-991-2001