Serving MA, NH, CT, RI, ME, VT & NY
Industrial Coating Contractor for Plants and Facilities
We prep to a white metal finish and apply 100% solids epoxy to chillers, heat exchangers, steel, tanks and floors. Free estimate after an on-site look.
- White metal blasting with full containment on site
- 100% solids epoxy: no solvents, no VOCs, no shrinkage
- Coating-based repair instead of costly replacement
Over 40 years of management team experience. Based in Franklin, NH.
Prefer to talk? Call (877) 427-0090
Request your free on-site estimate
Tell us about the equipment or surfaces you need coated. We price each project after an on-site inspection.
Why facilities teams call us for industrial coating work
Surface prep done right
Coating life starts with prep. We blast to a white metal finish (SSPC-SP 5 / NACE No. 1) inside a containment system that controls dust, debris and media.
100% solids epoxy system
Maximum film build per coat. No solvent flash-off, no VOC emissions, no shrinkage during cure, and a stronger cured film for constant water service.
Repair, not replace
We reconstruct corroded metal and concrete first, then coat. That keeps chillers, exchangers, towers and slabs in service for far less than replacement cost.
Minimal downtime
Quick-cure technology lets us work inside planned outage, shutdown and shoulder-season windows so your operation keeps running.
One contractor, many scopes
Chillers, heat exchangers, cooling towers, air handlers, steel, tanks, piping, epoxy floors, concrete repair, shotcrete and waterproofing.
Local to New England and NY
On-site service across MA, NH, CT, RI, ME, VT and New York, including Boston metro, NYC and the five boroughs, Long Island and Westchester.
What our industrial coating crews handle
We are a service contractor, not a coating seller. Our crews come to your site, clean and prep the surface, rebuild what corrosion has taken away, and apply a protective coating system built to stay put in tough industrial service.
Every job is led by experienced engineers and run by trained crews. Work is scheduled around your outage window, plant shutdown or summer break, and pricing is set per project after we inspect the equipment.
- Chiller tube sheet coating, repair and reconstruction
- Chiller tube end coating for erosion and cavitation damage
- Water box and end bell coating, including inlet and outlet nozzles
- Heat exchanger coating: shell-and-tube, plate and brazed-plate
- Condenser, evaporator and power plant condenser bundle coating
- Cooling tower basin, sump and deck coating and restoration
- Air handler coil, drain pan and casing cleaning and coating
- Industrial painting for structural steel, tanks and process piping
- Concrete floor coating, spall repair, crack injection, shotcrete and waterproofing
- Contained abrasive blasting to white metal, plus water blasting where needed
How the estimate works
Tell us about the job
Send the equipment or surfaces, the site location and any inspection findings. A short note is enough to start.
On-site inspection
We visit the facility, check corrosion depth and access, and confirm the repair and coating scope with your team.
Free written estimate
You get project-based pricing and a plan that fits your planned outage, shutdown or maintenance window.
Frequently asked questions
How do you price industrial coating projects?
Pricing is project-based and quoted after an on-site inspection. Cost depends on equipment size, surface condition, how much corrosion repair is needed, the scope of work and site access. The estimate is free.
What areas do you serve?
On-site service across New England (MA, NH, CT, RI, ME, VT) and New York, including Boston metro, NYC and the five boroughs, Long Island and Westchester. We are based in Franklin, NH. We do not work outside this area.
Do you sell coating materials?
No. We are a service contractor. We supply and apply the coating system as part of the project. We do not sell DIY coating products.
What kind of surface prep do you use?
Contained abrasive blasting to a white metal finish (SSPC-SP 5 / NACE No. 1 equivalent), with containment to control dust, debris and media. We use water blasting where chemical or environmental limits rule out dry abrasive.
Can you work during our shutdown or outage window?
Yes. We schedule mobilizations around planned outages, plant shutdowns, shoulder season and summer break. Quick-cure technology keeps downtime to a minimum. Emergency corrosion and leak mobilization is also available.
Do you replace chillers or do mechanical HVAC repair?
No. We do not sell or replace equipment, retube bundles, or handle refrigerant and compressor work. We restore surfaces with coating, repair and reconstruction as a lower-cost alternative to replacement.
Get a free estimate from an industrial coating contractor
Tell us what needs coating. We will inspect the site and send project-based pricing. Call (877) 427-0090 or send the form.
- White metal blasting with full containment on site
- 100% solids epoxy: no solvents, no VOCs, no shrinkage
- Coating-based repair instead of costly replacement
Prefer to talk? Call (877) 427-0090